Premierbond HT Hybrid MS Polymer Adhesive 290ml Cartridge is a high-tack cartridge adhesive used in PVC hygienic wall cladding installations. It supports smaller areas and detail work, helping installers create a neater, more reliable finish when fitting sheets, trims or sealed details. Choosing the correct-fitting product matters because hygienic cladding is only as good as the wall preparation, adhesive compatibility, and finishing method behind it.
This product is suitable for repairs, trims, and manageable sheet areas, including commercial kitchens, washrooms, healthcare rooms, care settings, schools, workshops, and general workplace refurbishments. It is intended for trade users, maintenance teams and capable DIY customers who want the right accessory to support a professional installation. The main benefit is quick cartridge application, which can save time on site and reduce the risk of messy or incomplete detailing.
Before ordering, check the substrate, room conditions, sheet size, expected coverage, and whether the job also requires trims, profiles, silicone, or applicator tools. Follow the product instructions and allow for proper preparation, curing, and cleanup. PVC Cladding Direct supplies adhesives, silicones and installation accessories from Sheffield to customers across the UK, helping projects move from sheet selection to a finished hygienic wall system.
The minimum amount of adhesive required per sheet is:
Sheet Size: 8 x 4ft (2500 x 1220mm) = 2 Cartridges
Sheet Size: 10 x 4ft (3050 x 1220mm) = 2.5 Cartridges
It is used for smaller areas and detail work as part of a PVC wall cladding installation. It helps installers apply cartridges quickly.
Yes. It is a practical choice for trade installations where smaller areas and detail work need to be carried out cleanly and consistently.
Most projects also need PVC sheets, trims or profiles, sanitary silicone and the correct applicator or spreading tool, depending on the installation method.
The minimum adhesive coverage required depends on your cladding sheet size:
- 8 × 4 ft Sheet (2500 × 1220 mm): 2 cartridges per sheet (provides a full, secure bead matrix).
- 10 × 4 ft Sheet (3050 × 1220 mm): 2.5 cartridges per sheet (approx. 5 cartridges per 2 sheets).
Technical Tip: Premierbond HT is a single-component hybrid MS polymer grab adhesive applied via a caulking gun. Apply continuous vertical beads across the rear of the panel for instant initial tack on walls.
Premierbond 2PT follows a specific curing timeline once Part A and Part B are thoroughly mixed:
– Pot Life / Working Time: 20 minutes at 20°C (longer at lower temperatures). All sheet cuts and substrate preparation must be completed before mixing.
– Initial Cure / Set: 20 minutes.
– Full Curing Time: 4 to 6 hours.
Important: Leave the adhesive to cure for at least 4 to 6 hours before removing the protective film from the cladding sheets. Ideal application temperatures are between 15°C and 25°C (minimum 10°C).
