Premierbond HT Crystal Clear Hybrid MS Polymer Adhesive 290ml Cartridge is a crystal clear hybrid adhesive/sealant used as part of a PVC hygienic wall cladding installation. It supports visible details, helping installers create a neater, more reliable finish when fitting sheets, trims or sealed details. Choosing the correct-fitting product matters because hygienic cladding is only as good as the wall preparation, adhesive compatibility, and finishing method behind it.
This product is relevant for transparent bonding or sealing tasks, including commercial kitchens, washrooms, healthcare rooms, care settings, schools, workshops and general workplace refurbishments. It is intended for trade users, maintenance teams and capable DIY customers who want the right accessory to support a professional installation. The main benefit is a clear finish in areas where appearance matters, which can save time on-site and reduce the risk of messy or incomplete detailing.
Before ordering, check the substrate, room conditions, sheet size, expected coverage, and whether the job also requires trims, profiles, silicone, or applicator tools. Follow the product instructions and allow for proper preparation, curing, and cleanup. PVC Cladding Direct supplies adhesives, silicones and installation accessories from Sheffield to customers across the UK, helping projects move from sheet selection to a finished hygienic wall system.
The minimum amount of adhesive required per sheet is:
Sheet Size: 8 x 4ft (2500 x 1220mm) = 2 Cartridges
Sheet Size: 10 x 4ft (3050 x 1220mm) = 2.5 Cartridges
It is used for visible details as part of a PVC wall cladding installation. It helps installers achieve a clear finish where appearance matters.
Yes, it is intended to support PVC hygienic cladding work, especially in transparent bonding or sealing tasks. Always check suitability for the substrate and site conditions.
Most projects also need PVC sheets, trims or profiles, sanitary silicone and the correct applicator or spreading tool, depending on the installation method.
Minimum coverage requirements using Premierbond Crystal Clear adhesive depend on sheet dimensions:
8 × 4 ft Sheet (2500 × 1220 mm): 2 cartridges per sheet.
10 × 4 ft Sheet (3050 × 1220 mm): 2.5 cartridges per sheet (5 cartridges per 2 sheets).Technical Tip: Premierbond Crystal Clear provides an invisible, high-strength bond. Apply continuous vertical beads across the rear of the panel using a standard caulking gun.
Premierbond Crystal Clear single-part hybrid polymer adhesive cures via atmospheric moisture following this reaction timeline:
- Skin Formation Time: 10 minutes at 23°C / 50% RH (position and press panels quickly after application).
- Initial Hold / Grab: Instant High-Tack (Initial setting within 30 minutes).
- Full Curing Time: 24 hours (cures at a rate of approx. 2–3 mm per 24 hours at 23°C / 50% RH).
Important: Cold temperatures, thick adhesive beads, or dry conditions will extend cure times. Ideal application temperature range is +5°C to +40°C.
