Premierbond 2-Part Adhesive 6.5ltr is a two-part adhesive used in PVC hygienic wall cladding installations. It supports full-sheet bonding, helping installers create a neater, more reliable finish when fitting sheets, trims, or sealed details. Choosing the correct-fitting product matters because hygienic cladding is only as good as the wall preparation, adhesive compatibility, and finishing method behind it.
This product is relevant for larger commercial installations, including commercial kitchens, washrooms, healthcare rooms, care settings, schools, workshops and general workplace refurbishments. It is intended for trade users, maintenance teams and capable DIY customers who want the right accessory to support a professional installation. The main benefits are bond strength and coverage planning, which can save time on-site and reduce the risk of messy or incomplete detailing.
Before ordering, check the substrate, room conditions, sheet size, expected coverage, and whether the job also requires trims, profiles, silicone, or applicator tools. Follow the product instructions and allow for proper preparation, curing, and cleanup. PVC Cladding Direct supplies adhesives, silicones and installation accessories from Sheffield to customers across the UK, helping projects move from sheet selection to a finished hygienic wall system.
The minimum amount of adhesive required per sheet is:
Sheet Size: 8 x 4ft (2500 x 1220mm) = 0.5 Tub
Sheet Size: 10 x 4ft (3050 x 1220mm) = 0.7 Tub
It is used for full sheet bonding as part of a PVC wall cladding installation. It helps installers achieve bond strength and coverage planning.
Yes, it is intended to support PVC hygienic cladding work, especially in larger commercial installations. Always check suitability for the substrate and site conditions.
Most projects also need PVC sheets, trims or profiles, sanitary silicone and the correct applicator or spreading tool, depending on the installation method.
The minimum adhesive coverage required depends on your cladding sheet size:
– 8 × 4 ft Sheet (2440 × 1220 mm): ½ tub per sheet (1 tub covers 2 sheets)
– 10 × 4 ft Sheet (3050 × 1220 mm): ¾ tub per sheet (2 tubs cover 3 sheets)
Technical Tip: Apply adhesive to the sheet using a 6 mm notched trowel (or 4–5 mm notch for flat plastered walls) and smooth outward from the centre for full-bed coverage.
Premierbond 2PT follows a specific curing timeline once Part A and Part B are thoroughly mixed:
– Pot Life / Working Time: 20 minutes at 20°C (longer at lower temperatures). All sheet cuts and substrate preparation must be completed before mixing.
– Initial Cure / Set: 20 minutes.
– Full Curing Time: 4 to 6 hours.
Important: Leave the adhesive to cure for at least 4 to 6 hours before removing the protective film from the cladding sheets. Ideal application temperatures are between 15°C and 25°C (minimum 10°C).
